You are here: 2012

Tiếng Việt (Vietnamese)English (United Kingdom)简体中文
JA slide show
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

England Hook Spring

Description of parameters for extension springs with England hooks

Physical parameters

  • d (wire diameter): This parameter describes the diameter of wire used as material for spring.
  • De (external diameter): External diameter of a spring concerns both hooks and coils. Tolerance for this parameter is (+-)2%(indicative).
  • H (Hole): This is minimum diameter of hole in which spring can work. Tolerance for this parameter is (+-)2%(indicative).
  • Ln (Maximum length): Maximum acceptable extension length for a spring. It is also the maximum extension for static applications. Tolerance for this parameter is (+-)15%(indicative).
  • Fn (Maximal force): Maximal acceptable force which can operate on a spring. It is also the maximum force for static applications. Tolerance for this parameter is (+-)15%(indicative).
  • L0 (free length): Free length is measured in spring's free state. Tolerance for this parameter is (+-)2%(indicative).
  • Nr of coils: This is a total number of coils in a spring - in the picture above it is equal to six.
  • R (Spring rate): This parameter determines spring's resistance, while it is working. It is measured in 1 DaN/mm = 10 N/mm. Tolerance for this parameter is (+-)15%(indicative).
  • L1 & F1 (length under charge F): The charge F1 at length L1 can be calculated using the equation : F1 = Fn - R(Ln-L1). Equation derived from the previous for calculating L1 = Ln - (Fn-F1)/R.
  • Hooks: Extension springs with English hooks have both hooks closed forming a ring. Both hooks lie in the same plane.
  • Reference Number: All springs are identified by a unique reference: type . (De * 10) . (d * 100) . (L0 * 10) . material ; for english extension springs, type is a letter "T", materials are identified by the following letters: "A" or "I". Example: T.063.090.0100.A is the extension spring with the external diameter 6.3 mm and the free length 10mm, produced from 0.9 mm music wire .


  • A (Music Wire): Steel that conforms to the EN 10270-1 class SH standard.
  • I (Inox steel): Inox 18/8 mark Z10 CN 18.09.


  • maximal force: Tolerance for the maximal force is (+-)15%(indicative).
  • maximal length: Tolerance for the maximal length is (+-)15%(indicative).
  • Spring rate: Tolerance for the spring rate is (+-)15%(indicative).

Hỗ trợ trực tuyến

TP Hồ Chí Minh Hà Nội
(A.Nghĩa) : 0908203777
Zalo 0908203777
Lò xo 16
Lò xo 16
Compress 5
Compress 5
Máy Trui 4
Máy Trui 4
Conical 1
Conical 1